RIDERS CUB DISCUSSION

Anything else ya ride!
Post Reply
User avatar
gtd65
Posts: 721
Joined: Sat Apr 26, 2014 9:29 am
Rides:: Super Cub 110cc, '83 Suzuki GS450GA & '86 Suzuki GSX-R750G, Kawasaki Zephyr
Location: Within 12,000 Miles of Galashiels in Scotland!
Contact:

Re: RIDERS CUB DISCUSSION

Post by gtd65 » Sun Aug 06, 2017 11:24 pm

Just had a random thought about fitting a rear rack to the super cub. Does anybody here have any experience with what fits a Rider's?

User avatar
hairygit
Posts: 174
Joined: Thu Oct 23, 2014 9:58 pm
Rides:: 1986 C90, 1975 CB750F1, 1982 CB650SCC
Location: Woodbury, Devon

Re: RIDERS CUB DISCUSSION

Post by hairygit » Mon Aug 07, 2017 1:55 pm

Don't know about rear racks, but I have a Riders spine rack, exhaust and seat all fitted straight onto my C90G (1986), so chances are a cub one will fit a Riders Cub. Probably be worth a look on flea bay for a Riders one, bound to be cheaper! :D :D :D

User avatar
gtd65
Posts: 721
Joined: Sat Apr 26, 2014 9:29 am
Rides:: Super Cub 110cc, '83 Suzuki GS450GA & '86 Suzuki GSX-R750G, Kawasaki Zephyr
Location: Within 12,000 Miles of Galashiels in Scotland!
Contact:

Re: RIDERS CUB DISCUSSION

Post by gtd65 » Mon Aug 07, 2017 2:40 pm

The Rider's stuff seems to be dwindling on eBay these days but I did see some C90 racks for about £24 delivered.

User avatar
gtd65
Posts: 721
Joined: Sat Apr 26, 2014 9:29 am
Rides:: Super Cub 110cc, '83 Suzuki GS450GA & '86 Suzuki GSX-R750G, Kawasaki Zephyr
Location: Within 12,000 Miles of Galashiels in Scotland!
Contact:

Re: RIDERS CUB DISCUSSION

Post by gtd65 » Sat Sep 16, 2017 7:45 pm

Well I finally got round to painting a red LHS panel white to use with the Super Cub.

I used the Poundland's finest white paint rattle can and it was just enough coverage for one side panel. Actually, I thought it would go further!

Will take a couple of pics to show the finished product when the weather improves.

Pity I can't use the other RHS panel (I bought a pair) as it's not deep enough to accept the electrical gubbins under the orginal one that's the same general style as the little cub type.

Mattt
Posts: 601
Joined: Mon Feb 15, 2010 9:53 pm
Rides:: Honda c90c Chaly CF70 Yamaha YDS5 Honda CB400n superdream
Location: Surrey

Re: RIDERS CUB DISCUSSION

Post by Mattt » Tue Sep 26, 2017 10:27 pm

Number plate bracket cracked
Its broken around the bolt area on both sides ,probably due to 30 speed humps on every trip out
Ive repaired it,but a square of strong double sided tape on the number plate to the rear mudguard would have stopped it cracking

User avatar
garth
Posts: 787
Joined: Mon Oct 26, 2009 6:14 pm
Rides:: C50LAC / C90 plop / C90 / Versys / WK450 RX
Location: Southampton

Re: RIDERS CUB DISCUSSION

Post by garth » Wed Sep 27, 2017 11:59 am

I found changing engine mounts to Honda ones stopped vibration significantly.

Mattt
Posts: 601
Joined: Mon Feb 15, 2010 9:53 pm
Rides:: Honda c90c Chaly CF70 Yamaha YDS5 Honda CB400n superdream
Location: Surrey

Re: RIDERS CUB DISCUSSION

Post by Mattt » Sun Nov 12, 2017 8:26 pm

Are there mounts ,its been a while since i took it apart i thought it was bolts right through the frame and engine dont recall any mounts

Mattt
Posts: 601
Joined: Mon Feb 15, 2010 9:53 pm
Rides:: Honda c90c Chaly CF70 Yamaha YDS5 Honda CB400n superdream
Location: Surrey

Re: RIDERS CUB DISCUSSION

Post by Mattt » Sun Nov 12, 2017 8:28 pm

Forgot to say
Check your fuel lines ,mines 3 1/2 yrs now,the fuel line where it slides onto the tap inlet was split along the whole of the tap itself ,another 2mm it would have been leaking fuel straight from the tank itself onto the engine

User avatar
gtd65
Posts: 721
Joined: Sat Apr 26, 2014 9:29 am
Rides:: Super Cub 110cc, '83 Suzuki GS450GA & '86 Suzuki GSX-R750G, Kawasaki Zephyr
Location: Within 12,000 Miles of Galashiels in Scotland!
Contact:

Re: RIDERS CUB DISCUSSION

Post by gtd65 » Mon Nov 13, 2017 1:12 am

Mattt wrote:
Sun Nov 12, 2017 8:28 pm
Forgot to say
Check your fuel lines ,mines 3 1/2 yrs now,the fuel line where it slides onto the tap inlet was split along the whole of the tap itself ,another 2mm it would have been leaking fuel straight from the tank itself onto the engine
I did notice some of the tubing under the leg shields was cracking on mine. It was air related from what I remember. Will need to get round to having another look. Might have been to do with the EGR system?

Busbuoy
Posts: 7
Joined: Sun Nov 26, 2017 11:55 am
Rides:: Kayak kainuo KN110-7A
Location: Gloucester

Re: RIDERS CUB DISCUSSION

Post by Busbuoy » Sun Nov 26, 2017 1:34 pm

Riders may not be importing anymore but others will. I purchased my new Kayak Kainuo KN110-7A Super Cub from Ital scooters of Cheltenham yesterday and looking forward to it's delivery
You do not have the required permissions to view the files attached to this post.

Post Reply