Honda 110i Wave.
- Diesel Dave
- Posts: 11055
- Joined: Tue Oct 13, 2009 7:25 pm
- Rides:: 1965 Enfield Diesel, 2017 Sterling, Modenas Kriss and CT200 - the only Cub left
- Location: Brentwood, Essex
Re: Honda 110i Wave.
Well he has my C90 electric start puller so may be lucky.
-
- Posts: 3467
- Joined: Sun Jun 06, 2010 6:19 pm
- Rides:: MaxSym 400i (2013) Wave110i (2014)
- Location: Orpington, UK
Re: Honda 110i Wave.
Cheers AE. I'm pretty sure it's not the same as the e-start cub. I have one of those extractors here. Thread is too fine although the diameter looks about right.
I'll wait to hear from you.
The guys on the German Innova/Wave forum reckon it is a M30x1,5 female thread.
I'll wait to hear from you.
The guys on the German Innova/Wave forum reckon it is a M30x1,5 female thread.
-
- Posts: 3467
- Joined: Sun Jun 06, 2010 6:19 pm
- Rides:: MaxSym 400i (2013) Wave110i (2014)
- Location: Orpington, UK
Re: Honda 110i Wave.
Nah, sorry to say that doesn't fit. Thanks anyway Dave.Diesel Dave wrote:Well he has my C90 electric start puller so may be lucky.
-
- Posts: 2903
- Joined: Thu Dec 01, 2011 4:31 pm
- Rides:: C90G(12v) NC750X dct msx125 Grom
- Location: LONDON SE20 /Blindly Heath Surrey
Re: Honda 110i Wave.
I got that here
If you want to borrow and I even here today Sunday doing LMRC basic maintenance day !
If you want to borrow and I even here today Sunday doing LMRC basic maintenance day !
- AE86
- Posts: 889
- Joined: Wed Dec 09, 2015 5:19 pm
- Rides:: Honda Dio 4T
- Location: SE Asia
Re: Honda 110i Wave.
Hi Steve, (PM sent by the way)
Sorry I didn't get out until today. Been quite busy.
So here's the pullers I picked up. There are three different flywheels on the e-start Wave 110s over here, so I hope this helps. Here's what I can tell you without seeing yours. I haven't seen your flywheel and it very well might be different.
Here are the sizes I was given from the lady I go to all the time for parts.
(This one I suspect is yours) Coarse thread, 28 mm (looks like 28.25 on my calipers). I have no way to measure the threads so I am unsure of the precise pitch.
1 is the same as the e-start Cub, fine thread 27 mm.
1 size is a female coarse thread, 20mm. I assume not yours since you said male thread.
There is also a female fine thread, but it's a non e-start version.
Sorry I didn't get out until today. Been quite busy.
So here's the pullers I picked up. There are three different flywheels on the e-start Wave 110s over here, so I hope this helps. Here's what I can tell you without seeing yours. I haven't seen your flywheel and it very well might be different.
Here are the sizes I was given from the lady I go to all the time for parts.
(This one I suspect is yours) Coarse thread, 28 mm (looks like 28.25 on my calipers). I have no way to measure the threads so I am unsure of the precise pitch.
1 is the same as the e-start Cub, fine thread 27 mm.
1 size is a female coarse thread, 20mm. I assume not yours since you said male thread.
There is also a female fine thread, but it's a non e-start version.
-
- Posts: 829
- Joined: Fri May 11, 2012 10:12 pm
- Rides:: None at present
- Location: Sheffield
Re: Honda 110i Wave.
Stevew.... I noticed in a pic that your wind sheild has one of those little flip things attatched. I seem to be right in the fire line of my Cubs wind shield receiving quite abit of buffeting.
So do you use it for the same reason.......how do you find it and how much should I be expected to pay
Cheers
Wuyang
So do you use it for the same reason.......how do you find it and how much should I be expected to pay
Cheers
Wuyang
-
- Posts: 3467
- Joined: Sun Jun 06, 2010 6:19 pm
- Rides:: MaxSym 400i (2013) Wave110i (2014)
- Location: Orpington, UK
Re: Honda 110i Wave.
'Tis one of these,Wuyang wrote:Stevew.... I noticed in a pic that your wind sheild has one of those little flip things attatched. I seem to be right in the fire line of my Cubs wind shield receiving quite abit of buffeting.
So do you use it for the same reason.......how do you find it and how much should I be expected to pay
Cheers
Wuyang
Ebay..291394594327
Works well and smooths things out well.
-
- Posts: 3467
- Joined: Sun Jun 06, 2010 6:19 pm
- Rides:: MaxSym 400i (2013) Wave110i (2014)
- Location: Orpington, UK
Re: Honda 110i Wave.
BTW off to Venhill in Dorking to get the puller i need tomorrow. £12.84
-
- Posts: 829
- Joined: Fri May 11, 2012 10:12 pm
- Rides:: None at present
- Location: Sheffield
Re: Honda 110i Wave.
Cheers stevew
-
- Posts: 3467
- Joined: Sun Jun 06, 2010 6:19 pm
- Rides:: MaxSym 400i (2013) Wave110i (2014)
- Location: Orpington, UK
Re: Honda 110i Wave.
OK just for the record 2012-2014 Honda Wave 110i flywheel puller (extractor) is 30 x 1.5 mm Female thread. Available from Venhill in Dorking, UK. part VT67.stevew wrote:BTW off to Venhill in Dorking to get the puller i need tomorrow. £12.84
Engine all back together now and sounds sweet as a nut. Thanks to my own personal mechanic Mat the Splat
Gave it a little ride up and down the road today so going to re-fit the tupperware tomorrow.