WANTED top engine mounting bolt for Honda C90z2 (wider diameter bolt)
-
- Posts: 90
- Joined: Thu Nov 24, 2022 6:24 pm
- Rides:: Honda C90 1978, Honda S90 1966
WANTED top engine mounting bolt for Honda C90z2 (wider diameter bolt)
I'm looking for a C90z2 engine mounting bolt, the top one with the extended thread for the leg shield
- wightegi
- Posts: 9728
- Joined: Tue Sep 01, 2009 7:23 pm
- Rides:: 12v 1988 e start C90,Royal Enfield Interceptor 650
- Location: Isle of Wight
Re: WANTED top engine mounting bolt for Honda C90z2 (wider diameter bolt)
Have a look at CSMNL Z2,
-
- Posts: 90
- Joined: Thu Nov 24, 2022 6:24 pm
- Rides:: Honda C90 1978, Honda S90 1966
Re: WANTED top engine mounting bolt for Honda C90z2 (wider diameter bolt)
Thanks for the recommendation. I have already looked on CMSNL they don't have this bolt in stock, neither does David Silver or ebay
- wightegi
- Posts: 9728
- Joined: Tue Sep 01, 2009 7:23 pm
- Rides:: 12v 1988 e start C90,Royal Enfield Interceptor 650
- Location: Isle of Wight
Re: WANTED top engine mounting bolt for Honda C90z2 (wider diameter bolt)
CSMNL said 3 left.
-
- Posts: 90
- Joined: Thu Nov 24, 2022 6:24 pm
- Rides:: Honda C90 1978, Honda S90 1966
Re: WANTED top engine mounting bolt for Honda C90z2 (wider diameter bolt)
They've actually listed them the wrong way round, Im after the one with the extended thread 90112046000
-
- Posts: 90
- Joined: Thu Nov 24, 2022 6:24 pm
- Rides:: Honda C90 1978, Honda S90 1966
Re: WANTED top engine mounting bolt for Honda C90z2 (wider diameter bolt)
Looked everywhere for it! Loads of places sell the later engine mounting bolts which are smaller in diameter, I originally ordered one of those but its quite a bit smaller, my original one was so seized up that i had to cut it off as I'm restoring the bike
- wightegi
- Posts: 9728
- Joined: Tue Sep 01, 2009 7:23 pm
- Rides:: 12v 1988 e start C90,Royal Enfield Interceptor 650
- Location: Isle of Wight
Re: WANTED top engine mounting bolt for Honda C90z2 (wider diameter bolt)
We have noticed a few diagrams in CSMNL which are wrong.
-
- Posts: 90
- Joined: Thu Nov 24, 2022 6:24 pm
- Rides:: Honda C90 1978, Honda S90 1966
Re: WANTED top engine mounting bolt for Honda C90z2 (wider diameter bolt)
Yeah I've had a few items that have been listed for a bike and don't actually fit. I can kind of see why they might of got these bolts the wrong way around from the diagram (the position they are on the diagram) but looking closer they should of noticed the shape of each bolt
-
- Posts: 448
- Joined: Sun Jun 16, 2019 9:10 pm
- Rides:: c90 z2 (1978)
- Location: Herts
Re: WANTED top engine mounting bolt for Honda C90z2 (wider diameter bolt)
I wonder if you could adapt a triumph t120 cylinder head stud - they are approx 10mm and have a welded nut on.
https://www.ebay.co.uk/itm/143393061699
https://www.ebay.co.uk/itm/143393061699
-
- Posts: 894
- Joined: Fri Mar 04, 2016 11:01 pm
- Rides:: C90 CBR600 PE175
- Location: Derbyshire-Leicestershire Border
Re: WANTED top engine mounting bolt for Honda C90z2 (wider diameter bolt)
Regarding Nabs suggestion
The guy selling is registered as Matts Machine shop so i assume he making them not selling originals.
Ask him if he can make you a bespoke bolt
It's likely he's got a CNC setup and knocks a 100 out every now and then so expect to pay a bit more for a one off.
The guy selling is registered as Matts Machine shop so i assume he making them not selling originals.
Ask him if he can make you a bespoke bolt
It's likely he's got a CNC setup and knocks a 100 out every now and then so expect to pay a bit more for a one off.