I have swapped this head with a new one and want to find a home for it. Comes with valve guides, stem seals (used ones) and valves. Reason for swapping is one of the exhaust studs. It was held in place by that type of A+B Plasticine that turns to ”steel”. It did not work at all obviously. If you can mill it and re-tap it or helicoil it to M6, weld it etc. it would be great since it's a good head. This head came off of a 1997 C90T kick start and it has travelled 15,444.9 miles (picture with the odo). It comes in the respective original box reading P/N 12200-GTO-751. £40 posted. Thank you.
