Engine Parts

Pizza Dude · Post by **Pizza Dude** » Thu Jul 02, 2009 10:12 am

I have boxes of cub 90 engine parts, from heads, gearboxes, clutches, covers, to small items. All the parts are good and have been taken from donor engines that have been made into larger capacity beasts. Also some C50 parts as well.

If anybody needs anything let me know.

yellasei · Post by **yellasei** » Fri Jul 03, 2009 10:02 pm

what 50 parts do you have and which model are they from??

Pizza Dude · Post by **Pizza Dude** » Sat Jul 04, 2009 10:43 am

yellasei wrote:what 50 parts do you have and which model are they from??

Heads, cranks, cases, gearboxes, clutch, kickstarts, just about all engine parts, all 6V.

Post by **Newtsalad** » Sat Jul 04, 2009 3:16 pm

Hi Dude
Do you have a small (approx 50-60mm) 2 hole points cover off of an early OHV engine by any luck? It's for my 1964 C100.
I also have a '79 90zz with engine parts missing, I think clutch, generator etc. Not sure exactly. Maybe I could post up some photo's of what I do have, and perhaps you would be kind enough to let me know if you have what I need.

yellasei · Post by **yellasei** » Mon Jul 06, 2009 9:36 am

do you have a piston from a 50zz?? i need one and it does'nt matter on the condition, for a template to machine a 70 piston to match my 50 head.

CeeGee · Post by **CeeGee** » Mon Jul 06, 2009 10:11 am

Do you have a decent head for an '86 12V cub going? If so, how much do you want for it?

Pizza Dude · Post by **Pizza Dude** » Mon Jul 06, 2009 5:21 pm

Newtsalad wrote:Hi Dude
Do you have a small (approx 50-60mm) 2 hole points cover off of an early OHV engine by any luck? It's for my 1964 C100.
I also have a '79 90zz with engine parts missing, I think clutch, generator etc. Not sure exactly. Maybe I could post up some photo's of what I do have, and perhaps you would be kind enough to let me know if you have what I need.

H Newt

I'm afraid I don't have any OHV parts now. Used to when I had a C100 and C114.

I also don't have any 6V 90 parts, only 12V.

Pizza Dude · Post by **Pizza Dude** » Mon Jul 06, 2009 5:27 pm

yellasei wrote:do you have a piston from a 50zz?? i need one and it does'nt matter on the condition, for a template to machine a 70 piston to match my 50 head.

I'm not sure I'll have to look.

When I've done this in the past (don't really like doing it) I've just machined the piston straight across until it fits inside the head.

Pizza Dude · Post by **Pizza Dude** » Mon Jul 06, 2009 5:32 pm

CeeGee wrote:Do you have a decent head for an '86 12V cub going? If so, how much do you want for it?

I have some 12V heads, some plain bearing and some ball bearing. They are in various stages of modification, porting, new valve guides etc.

yellasei · Post by **yellasei** » Tue Jul 07, 2009 9:27 pm

if you do have a piston mate, can you let me know. thanks

C90Club.co.uk

Engine Parts

Engine Parts

Re: Engine Parts

Re: Engine Parts

Re: Engine Parts

Re: Engine Parts

Re: Engine Parts

Re: Engine Parts

Re: Engine Parts

Re: Engine Parts

Re: Engine Parts