Honda SuperCub C90G and T spares needed gone

RE-OPENED :)
Post Reply
User avatar
George
Posts: 1349
Joined: Tue Dec 01, 2009 3:07 pm
Rides:: 2015 NBC110XD Cross Cub; 2000 C90T Super Cub; 1998 C90CWV Super Cub De Luxe.
Location: Royal Leamington Spa, UK

Honda SuperCub C90G and T spares needed gone

Post by George » Mon Sep 10, 2018 8:46 am

Hello again, I have found some more bits that need gone, prices will be symbolic and negotiable as I need them out of the way. Sold my daily C90s and I don't need these anymore:

Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image

Some bits have sold on the facebook page (big mistake in advertising there...) and these are:

- the 6V Rickman fairing
- Lifan stator + rotor
- front rim with spokes (left with a rear rim with spokes)
- both grab handles

What's left is:

- Almost complete seat (hinge assembly is incomplete, one tear on the side)
- 4 x shoe springs OEM new
- Pl, Silencer - 50385-GB4-000 - used part
- Upper handlebar cowl in used condition with one of the fixings damaged but still have the broken piece so could be glued?
- 2 x exhausts, one from a C90T, the other from a C50 Little Cub (50 won't fit a 90 without some mods)
- OEM new side stand bolt + nut + probably pattern spring.
- Pattern complete front wheel C90G type.
- 3 x bolt + nylock nuts + 2 x spacers for the Rickman rear carrier (the one with the side bag support) these fixings go on the indicator stem fixing location.
- 1 x JT front sprocket new 16T
- Some o-rings and 2 x valve stem seals for the C90G type engine (1986 - 1994?) + 2 gudgeon pin clips.
- Both caps for a C90MT E-Start LH engine cover. The one for the crank nut and the other one for the inspection (checking the flywheel markings for the T F marks) These are OEM new.
- 2 x? copper washers for the head stud top nut seal for the oil feed. New OEM
- 2 x valve stem seals for the C90T (1996-2002) New OEM
- 4 x rear shocks in Shuttle Blue.
- 1 x engine guard (this was received as a gift from Diesel Dave, so would accept just the postage fees for it... never fitted it so not sure how it fits).
- 4 x horns. One is pattern and works, not sure about the other 3. 2 of them might need tuning.
- C90G Square spaced indicators Rickman Faring + fixings. No clear screen with this one. Can be bought new. This one was never fitted so as new.
- Rear rim with spokes, cush drive rubbers
- 2 x mirror mounts (original risers) + 2 x LH threaded nuts + the 2 x rubber protectors that come over the nut and risers. These are all new OEM. So everything for the mirrors without the actual mirrors. :lol:
- 3 x ring sets, 3 x gudgeon pins, 3 x 2 gudgeon pin clips all new (pattern)
- 1 x ring set Original OEM, a complete lower dirtshield fixing set (long screw + spacer + washer all OEM new but not in their original wrappings), overflow or breather hose for the carb... not sure which one... probably breather. 1 magnetic sump plug and washer, 2 x in line fuel filters, 1 x set of cush drive rubbers, some front forks mounts, etc.
- 1 x brake shoes OEM new
- 1 x throttle cable used.

Feel free to ask anything. I'll take offers for all of these.

Thank you.

George M.

User avatar
ally
Posts: 481
Joined: Mon Dec 09, 2013 4:51 pm
Rides:: dr750, mz skorpion traveller, v90, v75a, c90-g, innova fi, fj1200
Location: lincoln
Contact:

Re: Honda SuperCub C90G and T spares needed gone

Post by ally » Mon Sep 10, 2018 2:24 pm

pm sent

:)

Billbott
Posts: 121
Joined: Sat Aug 06, 2016 7:30 pm
Rides:: 1965 Honda C100 1981 Yamaha RD350LC 1995 Suzuki DR350 2000 Honda C90 2017 BMW S1

Re: Honda SuperCub C90G and T spares needed gone

Post by Billbott » Mon Sep 10, 2018 2:44 pm

Messaged you 8-)

User avatar
George
Posts: 1349
Joined: Tue Dec 01, 2009 3:07 pm
Rides:: 2015 NBC110XD Cross Cub; 2000 C90T Super Cub; 1998 C90CWV Super Cub De Luxe.
Location: Royal Leamington Spa, UK

Re: Honda SuperCub C90G and T spares needed gone

Post by George » Tue Sep 11, 2018 8:16 am

Replied to all. :D

User avatar
George
Posts: 1349
Joined: Tue Dec 01, 2009 3:07 pm
Rides:: 2015 NBC110XD Cross Cub; 2000 C90T Super Cub; 1998 C90CWV Super Cub De Luxe.
Location: Royal Leamington Spa, UK

Re: Honda SuperCub C90G and T spares needed gone

Post by George » Sun Sep 23, 2018 7:25 pm

I have found these as well. Front spindle + spacer and nut and rear C90G wheel hub. Drum has surface rust and should clean properly:

Image Image

I'll try to redo the list as some parts are sold now. Feel free to ask me for availability nevertheless. :)

Thank you.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest