plop project

Place your Plopping Posts here! Sub forum dedicated to C90 racing, tuning, and plopping!
fazey
Posts: 80
Joined: Mon Dec 19, 2016 11:58 am
Rides:: retro's
Location: matlock

plop project

Post by fazey » Sun Jan 15, 2017 5:28 pm

From a box of bits i'm pretty happy with the way this is coming on.
Just need to come down that reserve list now.

Image

fazey
Posts: 80
Joined: Mon Dec 19, 2016 11:58 am
Rides:: retro's
Location: matlock

Re: plop project

Post by fazey » Sun Jan 15, 2017 5:35 pm

Need a new carb.
anyone tell me if these are any good ?
http://www.ebay.co.uk/itm/New-Honda-C90 ... SwxCxT6cim

User avatar
Alan CF
Posts: 6058
Joined: Mon May 09, 2011 6:10 pm
Rides:: MOT 18/6/18 TAX 31/5/18 INS 10/8/17
Location: CHESTERFIELD

Re: plop project

Post by Alan CF » Sun Jan 15, 2017 6:15 pm

Should be ok, But i think your loosing 1mm on the Ventura.

C90 Class
1. Max 90cc. No big-bore kits
2. Standard Keihin PB type carb (max 15mm slide / 19mm exit) and standard Honda C90/C70 inlet manifold only.
3. Standard design 2 valve single OHC cyl head only
4. 3-Speed semi-auto clutch only

fazey
Posts: 80
Joined: Mon Dec 19, 2016 11:58 am
Rides:: retro's
Location: matlock

Re: plop project

Post by fazey » Sun Jan 15, 2017 8:48 pm

did notice its 18mm and not 19mm but it is origanal and that is what the rules states. I have 3 carbs here but they all have bits missing and in a state i wouldnt want to use.

fazey
Posts: 80
Joined: Mon Dec 19, 2016 11:58 am
Rides:: retro's
Location: matlock

Re: plop project

Post by fazey » Sun Jan 15, 2017 8:50 pm

By the way will be in the open class.

fazey
Posts: 80
Joined: Mon Dec 19, 2016 11:58 am
Rides:: retro's
Location: matlock

Re: plop project

Post by fazey » Sun Jan 22, 2017 12:10 pm

Where to start. best get looking for some information on this.
I know there is a needle circlip missing plus the cable stop above the slide.
Guy who sold me these took them all to bits and this is how i got them plus there is 70 and 90 bits mixed in. headache time.

Image

fazey
Posts: 80
Joined: Mon Dec 19, 2016 11:58 am
Rides:: retro's
Location: matlock

Re: plop project

Post by fazey » Mon Jan 30, 2017 8:03 pm

Managed to get the carb sorted. So had a go at the back brake convertion, didnt turn out to bad.
Not quite finished yet but its on and working.
Please let me know if i'm missing something..


Image

culfy
Posts: 1126
Joined: Thu May 27, 2010 2:47 pm
Rides:: several honda c90's c70 and c50, lambretta li special puch and a honda cbf
Location: sheffield

Re: plop project

Post by culfy » Mon Jan 30, 2017 8:26 pm

Looks good Fazey,what exhaust you going to use ?

fazey
Posts: 80
Joined: Mon Dec 19, 2016 11:58 am
Rides:: retro's
Location: matlock

Re: plop project

Post by fazey » Mon Jan 30, 2017 9:28 pm

Not got an exhaust yet. need to get hold to something. would like a race exhaust but we dont have a big budget.

User avatar
Ventura
Posts: 609
Joined: Thu Nov 24, 2011 8:46 pm
Rides:: '91 C90, '73 ST70 & Z50, '76 TL125 x2, '73 Yam RD350, '06 Scram, '16 Yam XSR900,
Location: Merseyside

Re: plop project

Post by Ventura » Mon Jan 30, 2017 9:56 pm

fazey wrote: Not quite finished yet but its on and working.
Please let me know if i'm missing something..
Lookin' good so far Fazey!
You may need to brace the anchor point a bit to stop it flexing under full braking load.

V.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest