Tried Honda crank case breather no joy there either
So today rode to Orwell's Ipswich (Suzuki now a very small afterthought of sales floor & no new address models)
Spoke with parts department & very helpful even showing me the schematic and identify the part, input the part number and screen states invalid number.
Computer says No
so that was the end of that.Went to John Banks Honda at Bury pre owned C125 on sales floor double mileage of mine, chrome pitting in same places (but mine worse tbh) & only a saving of £300 on new reaffirmed built down to budget not up to a standard.
Lots of monkey bikes & Honda Visions (but bugger me seats hard) but I do like the Vision. All the new colour PCX sold
Trundle into parts department ask for part numbers for Crank case breather (company policy not to give out part numbers
) but printed schematic off and identified what I wanted, it was like ordering a Chinese meal by number (I was looking for Crank case breather under crank case NOT airfilter -stupid boy) I ordered X2 air filter caps & clips costing around £2 each and wait for it, they coming from Belgium ETA unknown
These I hope will marry up to the address fitting 
& I will use instead ofSo for good measure ordered crank case breather tube (over a fiver) and clip + new air filter (told to ring me when all parts in)
Back to sales, carried on looking and advised if I needed help my colleague is sat around the corner. As before a Ouija board needed to converse so I left. Here's hoping the new branch opening in Colchester is better.
Lots of time wasted for the most insignificant part but I'm hoping this isn't going to become the norm for Suzuki parts
) if Honda parts fit
