vibrations in cub derrivatives?

Anything else ya ride!
Post Reply
User avatar
drago76
Posts: 64
Joined: Sun Oct 19, 2014 1:27 pm
Rides:: JMStar JSD100, Honda CB500s 1998, Ex-Yamaha XJ600 1991
Location: Latvia,Riga
Contact:

vibrations in cub derrivatives?

Post by drago76 » Tue Aug 01, 2017 8:18 am

hello!
I have an JMStar jsd100-6 a-la honda wave chinese copy.
97cc 4-stroke, semiauto clutch, 4 gears, so on.
428 chain ( i think, better choice than 420 who is used in hondas, and often break during ride),
excellent small bike , especially for its low price ( get it for 640 euro, new, yet produced about 7 years ago :D).
but - one of things, beside of bit small top speed ( about 80 - 85 kph) i do not like in it.
that was vibrations, especially on rpm higher than 5000 -5500

in short distances, and in city it was non important, but on long rides, when you in the saddle for hours and hours, it was no good for healts, and for enjoying travel too.
what is situation in that with honda wave / innova?

other chinese cub-likes?

my next moped i want with small as possible, vibrations...

User avatar
Diesel Dave
Posts: 10187
Joined: Tue Oct 13, 2009 7:25 pm
Rides:: 1965 Enfield Diesel, 2017 Sterling, Modenas Kriss and CT200 - the only Cub left
Location: Brentwood, Essex

Re: vibrations in cub derrivatives?

Post by Diesel Dave » Tue Aug 01, 2017 12:07 pm

Can't speak for the Wave (queue SteveW), but the Innova is very smooth.

User avatar
Newtsalad
Admin & site janitor.
Posts: 15494
Joined: Fri May 01, 2009 8:30 am
Rides:: XL1200c, Cali III, R80RT,GS750,XV535,XL350,BN125,C90's,C200's,CT200,Little Cub's
Location: Essex boy loose in Suffolk!

Re: vibrations in cub derrivatives?

Post by Newtsalad » Tue Aug 01, 2017 1:22 pm

Check the engine mounting bolts, and the swing arm bolt, are good and tight. If they are loose vibration is very bad on Cubs too.

User avatar
AE86
Posts: 606
Joined: Wed Dec 09, 2015 5:19 pm
Rides:: 17' Wave 125, 10' YBR125
Location: Vietnam

Re: vibrations in cub derrivatives?

Post by AE86 » Wed Aug 02, 2017 12:35 am

The Wave 110 is quite smooth too. Just took mine for an "Italian tune up" (meaning riding the nuts of it for 20 minutes), and it wound up to 7-8k without much trouble. I might wear gloves for a long ride, but even for rides over 30 minutes I feel no need and don't feel "buzzy" afterwards.

Bill/Rubery
Posts: 175
Joined: Sat Jul 06, 2013 9:02 am
Rides:: Peugeot Vox 110 cc
Location: North Worcestershire

Re: vibrations in cub derrivatives?

Post by Bill/Rubery » Wed Sep 27, 2017 6:25 pm

Dare I say it??!....Try riding at a decent speed.....you know? Slower....boy o' boy! :roll:

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 1 guest