Peugeot Vox

Anything else ya ride!
stevew
Posts: 3467
Joined: Sun Jun 06, 2010 6:19 pm
Rides:: MaxSym 400i (2013) Wave110i (2014)
Location: Orpington, UK

Re: Peugeot Vox

Post by stevew » Wed Jul 19, 2017 3:34 pm

Not a Vox man myself but have owned a Loncin and currently a Wave.

My take would be that at 5K there really shouldn't be anything wrong at all.
I'd be looking to see if it's ever been taken apart in any way ( it shouldn't have been) nothing should be needed in that short mileage except oil changes.
Ask him how many oil changes it has had, ideally every 1000 miles.
Check the screws that hold the plastics on, also the 8mm hex head bolts around the engine casings.
Make sure the clutch works as it's intended. Have a look at the clutch adjuster nut and screw. Has it rounded or been mullered in any way?
If the price is right and it's all unadulterated, go for it.

Peugeot bikes generally seem pretty good although Chinese. It seems that there some good Chinese manufactures out there as my HONDA Wave is also a Chinese product .

User avatar
AE86
Posts: 889
Joined: Wed Dec 09, 2015 5:19 pm
Rides:: Honda Dio 4T
Location: SE Asia

Re: Peugeot Vox

Post by AE86 » Thu Jul 20, 2017 2:15 am

My Yamaha YBR is also built in China and it's not bad at all, although I wish it were sturdier. As mentioned, it's all about price, and for how much the bike originally cost, hard to argue with how much you get.

User avatar
gtd65
Posts: 721
Joined: Sat Apr 26, 2014 9:29 am
Rides:: Super Cub 110cc, '83 Suzuki GS450GA & '86 Suzuki GSX-R750G, Kawasaki Zephyr
Location: Within 12,000 Miles of Galashiels in Scotland!
Contact:

Re: Peugeot Vox

Post by gtd65 » Thu Jul 20, 2017 8:55 am

The YBR is built by Jianshe for Yamaha. They also make/made their own Jianshe branded bike for the UK market with a Yamaha engine. JS125-6A or suchlike.

What does a new YBR cost over your way?

User avatar
Viper254
Posts: 523
Joined: Fri Apr 19, 2013 12:16 am
Rides:: C70C (12v) (1983), Suzuki Inazuma 250 (2016)
Location: Stoke-on-Trent

Re: Peugeot Vox

Post by Viper254 » Thu Jul 20, 2017 10:57 am

gtd65 wrote:
Thu Jul 20, 2017 8:55 am
The YBR is built by Jianshe for Yamaha. They also make/made their own Jianshe branded bike for the UK market with a Yamaha engine. JS125-6A or suchlike.

What does a new YBR cost over your way?
Jianshe were originally a tank manufacturer for the state! Fun fact.

Their subsidary Tianda puts together the Lexmoto Aspire for this country, although there's very few common parts.

Jianshe also did a few models for Sinnis - their SC125 sticking in my mind particularly.

User avatar
AE86
Posts: 889
Joined: Wed Dec 09, 2015 5:19 pm
Rides:: Honda Dio 4T
Location: SE Asia

Re: Peugeot Vox

Post by AE86 » Thu Jul 20, 2017 11:29 am

gtd65 wrote:
Thu Jul 20, 2017 8:55 am
The YBR is built by Jianshe for Yamaha. They also make/made their own Jianshe branded bike for the UK market with a Yamaha engine. JS125-6A or suchlike.

What does a new YBR cost over your way?
A new XT125 (YBR is not sold here at dealers) is around £1,600. I got my bike for £450 but it didn't run, needed carb and ignition work and then soon afterwards a new top end and gearbox bearings, so it was obviously in poor nick.

Bill/Rubery
Posts: 178
Joined: Sat Jul 06, 2013 9:02 am
Rides:: Peugeot Vox 110 cc
Location: North Worcestershire

Re: Peugeot Vox

Post by Bill/Rubery » Wed Sep 27, 2017 6:51 pm

Jezze, Some of you people don't half ramble/rabbit on! As the owner of a Vox I think its great. The only problem is taking off the plastic bits to do the 1000 MILE services. The petrol consumption is amazing but then my average speed seems to be 28 mph. The seat is awful (just like my Innova was) but I have a blow up cushion type seat which is wonderful. I made a mud flap for the front wheel as I ride Worcestershire country lanes... where muck of all sorts is evident...NONE hits the pot head thanks to the mud flap! The chain guard is going slightly rusty but as the Vox is a near copy of the Innova no doubt a Honda one will fit. Unlike my old Honda 90 the Vox has large plastic spokes so no over winter greasing up there. I saw loads of these clones in Langwi last year on holiday, all belting along with two up and falling apart! In all, a great bike!

User avatar
wightegi
Posts: 9709
Joined: Tue Sep 01, 2009 7:23 pm
Rides:: 12v 1988 e start C90,Royal Enfield Interceptor 650
Location: Isle of Wight

Re: Peugeot Vox

Post by wightegi » Thu Sep 28, 2017 7:34 am

Plastic spokes :o :? :roll:

Bill/Rubery
Posts: 178
Joined: Sat Jul 06, 2013 9:02 am
Rides:: Peugeot Vox 110 cc
Location: North Worcestershire

Re: Peugeot Vox

Post by Bill/Rubery » Tue Oct 03, 2017 9:31 pm

The mentioned 'plastic spokes' appear to be plastic, smarty pants...but are really five cast... dare I say...spokes of metal and part of the wheel. A great advance on the fully spoked wheel of the Cub with its rust prone chrome surface.....

The Devon Rider
Posts: 25
Joined: Sat Dec 27, 2014 3:13 pm
Rides:: Peugeot Vox
Location: Torbay, devon

Re: Peugeot Vox

Post by The Devon Rider » Thu Oct 05, 2017 8:28 pm

I am still enjoying my Vox and like Bill's there is a small amount of rust on the chain guard case but that's normal when like me you live by the sea. The only problem I have is that the top box fitted when I bought the bike is broken so I need a small cheap one to replace it. Any ideas folks?

stevew
Posts: 3467
Joined: Sun Jun 06, 2010 6:19 pm
Rides:: MaxSym 400i (2013) Wave110i (2014)
Location: Orpington, UK

Re: Peugeot Vox

Post by stevew » Fri Oct 06, 2017 7:49 am

E- Bay is your friend here.

Post Reply