Panel Fit - Vox

Anything else ya ride!
Post Reply
daftbil
Posts: 2
Joined: Mon Jun 26, 2017 4:24 pm
Rides:: Vox. 350LC, RF600

Panel Fit - Vox

Post by daftbil » Mon Jun 26, 2017 4:40 pm

Hi All.

I bought a Vox which was cheap.

Mistake number 1.

Almost certainly stolen/ recovered (steering lock bit of the handlebar is smashed off), mismatch of panels, chain guard gone, stretched chain, threads on the chain adjusters stripped, cut centre stand (and so on)

I only need a cheap commuter and it doesn't have to be pretty so I'm going to try and get it MOT ready. That's probably mistake number 2.

My first problem is getting the headlight to point in the right direction (currently too high as a consequence of some of the internal plastic mounts breaking off. I'm in the progess of plastic welding/ epoxying them back but it just doesn't seem to fit and I'm wondering if the handlebars have got a tiny bit bent. Can anyone help with a picture of the inside of the console with the rear speedo cover still in place? And a picture of how the throttle assembly relates to it?

Thanks in advance!

Post Reply