Hi there guys and girls,
I’m new to the forum so hello to everyone. I’m in the middle of re-commissioning a 1999 c90 cub for a pal and first thing I found was lack of compression down to a bent exhaust valve which has all been replaced and engine is back together. Just a quick one but does anybody on here have access to the torque settings for the cylinder head etc etc? I’d just like to double check everything before letting my pal out on it.. much appreciated
Scott.
Hi guys thanks for the add..
-
- Posts: 2
- Joined: Mon Dec 12, 2022 11:00 pm
- Rides:: Lots including c90
- bikerbaker
- Posts: 2820
- Joined: Thu Nov 07, 2013 2:35 pm
- Rides:: 1990 C90, 2016 Kayak 110, Riders Cub, 2xSV650, BMW F800GT, Buell XB12R CT90/110
- Location: Rochford Essex
Re: Hi guys thanks for the add..
All fairly generic, the manual is downloadable following the following thread.
viewtopic.php?f=44&t=34257
You do not have the required permissions to view the files attached to this post.
- Capitano
- Posts: 5785
- Joined: Wed Oct 27, 2010 8:05 pm
- Rides:: '92 C90, '97 Divvy 6, 36V home-built e-bike
- Location: West Sussex
- Contact:
Re: Hi guys thanks for the add..
Welcome to c90club!
I was going to suggest repeating the question in one of the technical sections, but bikerbaker has already provided the info.
I was going to suggest repeating the question in one of the technical sections, but bikerbaker has already provided the info.
-
- Posts: 2
- Joined: Mon Dec 12, 2022 11:00 pm
- Rides:: Lots including c90
Re: Hi guys thanks for the add..
Thank you guys you’ve really helped out.
Little bike is running lovely, just awaiting replacement clutch now.
Awesome group. Thank you very much
Little bike is running lovely, just awaiting replacement clutch now.
Awesome group. Thank you very much