Page 1 of 1
Newbie
Posted: Tue Jul 17, 2018 4:45 pm
by Mossy
Looking to build a custom cub so will be asking loads of questions, never owned one before so i may sound a bit stupid, Hey Ho!!
Re: Newbie
Posted: Wed Jul 18, 2018 9:01 am
by PhilB
Welcome, and good luck with the build!
Re: Newbie
Posted: Thu Jul 19, 2018 9:35 am
by Mossy
Thank you.
Am I right to assume that 12v is better
Round headlight is 6v & 12v is square
Wheres the best place for wider forks and wheels etc
Been on Kepspeed site, all seems a bit vague and no prices
Thanks
Re: Newbie
Posted: Thu Jul 19, 2018 9:54 am
by bikerbaker
Mossy wrote: ↑Thu Jul 19, 2018 9:35 am
Thank you.
Am I right to assume that 12v is better
Round headlight is 6v & 12v is square
Wheres the best place for wider forks and wheels etc
Been on Kepspeed site, all seems a bit vague and no prices
Thanks
Welcome. Many would say that 12v is best and easiest to start with.
Round headlight can be 12v too. Somewhere on here is a definitive guide to Cubs but can't find it at the mo. You could try Google for it and with a bit of patience use the results from the forum (Usually quicker than using the forum search facility for older posts).
Try this one by Aliengravy
viewtopic.php?t=1094
As to Kepspeed stuff you will have to use a supplier such as Minibike Craze or Herts Motorcycles.
Re: Newbie
Posted: Thu Jul 19, 2018 10:47 am
by wightegi
Pitbike spares are selling kepspeed parts now.
viewtopic.php?f=11&t=1098
link to spotters guide
Re: Newbie
Posted: Thu Jul 19, 2018 11:51 am
by bikerbaker
Nice one! Knew it was there but you, being younger, obviously have more patience than me.