Hey
- herrod
- Posts: 1772
- Joined: Fri Jun 19, 2009 6:14 pm
- Rides:: C50 cd90z 600 Rotax flat tracker.
- Location: Barnsley
Re: Hey
it may be the camera lying but i looks like the seat it sloping forwards and the forks are at more of an angle than usual(as if the frame is bent),i'll have a scout for a similar picture to compare it to.Dash wrote:Not sure why - I would't notice its my first one
- cruncherkid
- Posts: 4102
- Joined: Tue Dec 07, 2010 6:49 pm
- Rides:: CD175
- Location: York, North Yorks, UK
Re: Hey
Totally agree Pjam, looks to have sagged in the middlePjam wrote:I noticed the forks too but also does it drop in the middle? the seat looks like it slopes down at the front!
- Alan CF
- Posts: 6761
- Joined: Mon May 09, 2011 6:10 pm
- Rides:: CUB RACING small cc engine rebuilds crank repairs
- Location: CHESTERFIELD
Re: Hey
i do agree, it cought my eye, she looks sagged, but if so them leg shields should not line up, gaps at the front bottom near the front Cover
the seat also looks much lower at the front, but you can see the edge of the front mudguard through the leg-shield hole and it looks crack on,
she broke her back but been fixed up.
the seat also looks much lower at the front, but you can see the edge of the front mudguard through the leg-shield hole and it looks crack on,
she broke her back but been fixed up.
- cruncherkid
- Posts: 4102
- Joined: Tue Dec 07, 2010 6:49 pm
- Rides:: CD175
- Location: York, North Yorks, UK
Re: Hey
I think it's bent right where the downtube meets the first rear bit of the frame, all nicely aligned at the front, but the giveaway is the bottom legshield boltholes which should be level with the barrel, not the exhaust!