few parts still needed. pit.cub
- dread
- Posts: 2471
- Joined: Thu Oct 06, 2011 9:52 pm
- Rides:: lamb chop, vespa cutdown. italjet dragster chopper
- Location: huntingdon
few parts still needed. pit.cub
17 toothed sprocket. for the pit/monkey engine are these all the same fitting and shape ect,
i want a set of cub foot pegs, i have played with the lifan bike ones. and will get away with on the road. but not with Mteck pipe so he says most probably.
red spong huge filter for the 26 mikuni carb
i'll have one more go at finding a 26 in let for it as well please.
3.5/4.5 inch, universal front light round chop style with bracket.
bound to be some thing else, i've just gone blank.
i want a set of cub foot pegs, i have played with the lifan bike ones. and will get away with on the road. but not with Mteck pipe so he says most probably.
red spong huge filter for the 26 mikuni carb
i'll have one more go at finding a 26 in let for it as well please.
3.5/4.5 inch, universal front light round chop style with bracket.
bound to be some thing else, i've just gone blank.
- dread
- Posts: 2471
- Joined: Thu Oct 06, 2011 9:52 pm
- Rides:: lamb chop, vespa cutdown. italjet dragster chopper
- Location: huntingdon
Re: few parts still needed. pit.cub
oh that was it, zz top rear bushes for the shockers, Ta
- Boo
- Posts: 8439
- Joined: Mon May 04, 2009 9:53 pm
- Rides:: Elephant Grey 1967 CM90 based 'bitsa'.
- Location: East Lancashire.
- Contact:
Re: few parts still needed. pit.cub
Just check the output shaft diameter on your engine. Most are 17mm, same as 12v C90 but I've seen some 125s with bigger like the 6v C90 (20mm?).dread wrote:17 toothed sprocket. for the pit/monkey engine are these all the same fitting
- Kieron
- Posts: 748
- Joined: Sun Aug 15, 2010 6:52 pm
- Rides:: C70c '82 (mule) - C70c '84 (chop) - CF70 (on its arse) - CD125tc '84
- Location: Barnsley - In the shed.
- Contact:
Re: few parts still needed. pit.cub
Whats the pitch of the rear cg copy sprocket? 420, 428.. does it matter?
17mm - 428 pitch http://www.ebay.co.uk/itm/Pit-bike-fron ... 27bbe5fe3a
20mm - 428 pitch http://www.ebay.co.uk/itm/Pit-bike-fron ... 27bbe5fbb3
20mm - 420 pitch http://www.ebay.co.uk/itm/17-TOOTH-420- ... 415b33bd4e
17mm - 420 ..cant find one.
17mm - 428 pitch http://www.ebay.co.uk/itm/Pit-bike-fron ... 27bbe5fe3a
20mm - 428 pitch http://www.ebay.co.uk/itm/Pit-bike-fron ... 27bbe5fbb3
20mm - 420 pitch http://www.ebay.co.uk/itm/17-TOOTH-420- ... 415b33bd4e
17mm - 420 ..cant find one.
- dread
- Posts: 2471
- Joined: Thu Oct 06, 2011 9:52 pm
- Rides:: lamb chop, vespa cutdown. italjet dragster chopper
- Location: huntingdon
Re: few parts still needed. pit.cub
cheers for getting back lads. ta boo shall try
now pitch, how the hell do i check that. any ideas
now pitch, how the hell do i check that. any ideas
- Pjam
- SPAMMER!
- Posts: 9608
- Joined: Tue Nov 03, 2009 11:47 am
- Rides:: C90, C70c, CB500, ANF125, A100 Bitsa
- Location: London
Re: few parts still needed. pit.cub
herrod did a nice fix for the footpeg widening, he cut them in the middle and put in a spacer/sleeve ... if it's down the middle the brackets form most of the strength ....
Hope that helps dread
Hope that helps dread
- Pjam
- SPAMMER!
- Posts: 9608
- Joined: Tue Nov 03, 2009 11:47 am
- Rides:: C90, C70c, CB500, ANF125, A100 Bitsa
- Location: London
Re: few parts still needed. pit.cub
It was only the 6 volt C90 that had the 428 pitch I think ...... some pit bikes do have them.dread wrote:cheers for getting back lads. ta boo shall try
now pitch, how the hell do i check that. any ideas
- dread
- Posts: 2471
- Joined: Thu Oct 06, 2011 9:52 pm
- Rides:: lamb chop, vespa cutdown. italjet dragster chopper
- Location: huntingdon
Re: few parts still needed. pit.cub
rear wheel is lifan lf125j city , so any idea .
might it say on the rear wheel sprocket or chain
might it say on the rear wheel sprocket or chain
- Pjam
- SPAMMER!
- Posts: 9608
- Joined: Tue Nov 03, 2009 11:47 am
- Rides:: C90, C70c, CB500, ANF125, A100 Bitsa
- Location: London
Re: few parts still needed. pit.cub
I would expect it to be 420, same as a Cub. The 6 volt 90 rear sprockets were usually 40 tooth. I can't remember seeing it stamped on the chain/sprockets but I'll you what I could do dread .... if I haven't chucked it I've got a 428 chain, I could send a few links ..... try it for size
- dread
- Posts: 2471
- Joined: Thu Oct 06, 2011 9:52 pm
- Rides:: lamb chop, vespa cutdown. italjet dragster chopper
- Location: huntingdon
Re: few parts still needed. pit.cub
zz z2 90 top engine boltdread wrote:16/17 toothed 428 pitch sprocket. ,
i want a set of cub foot pegs got, i have played with the lifan bike ones. and will get away with on the road. but not with Mteck pipe so he says most probably.
red spong huge filter for the 26 mikuni carb
i'll have one more go at finding a 26 in let for it as well please.
3.5/4.5 inch, universal front light round chop style with bracket.
bound to be some thing else, i've just gone blank.
zz z2 top shock bushes
poss also need a cg brazil speedo cable and one got a broken one i can try the bottom part of or w, h, y