End Can

RE-OPENED :)
Post Reply
TarnCub
Posts: 98
Joined: Mon Jun 27, 2011 9:02 pm
Rides:: 1985 C90E
Location: Barnsley

End Can

Post by TarnCub » Fri Sep 23, 2011 6:45 pm

Decent end can that's not rediculasly loud that will fit one of them m teck header pipes, pit bike one is driving me nuts
Top
User avatar
krazy kev
C90Club Clown!
Posts: 14603
Joined: Sat Mar 19, 2011 11:00 pm
Rides:: 12V CUB HEINZ
Location: Swansea. South Wales. UK

Re: End Can

Post by krazy kev » Thu Oct 06, 2011 4:05 pm

TarnCub wrote:Decent end can that's not rediculasly loud that will fit one of them m teck header pipes, pit bike one is driving me nuts
i can remember a friend of mine had a 6volt 90 that we used off road. the exhaust consisted of a standard downpipe connected to why was a two stroke
tail can from something like a suzuki ts or yamaha dt. it was rather quiet if i remember correctly. you will have to fabricate your own bracket. my mate modified
a cub exhaust bracket that bolted on to the swinging arm bolt. the exhaust note was similar to an old BSA single
Top
User avatar
Boo
Posts: 8439
Joined: Mon May 04, 2009 9:53 pm
Rides:: Elephant Grey 1967 CM90 based 'bitsa'.
Location: East Lancashire.
Contact:
Contact Boo

Re: End Can

Post by Boo » Sat Oct 08, 2011 12:23 pm

Suzuki RGV250 can works a treat and the bracket's in the right place already. There are two on the RGV, one above the other on the right. Either will do, just the bracket's in a slightly different position.
Sorry, not got one spare - just the info! :)

Image
Top
User avatar
Sw4mpy
Posts: 1143
Joined: Thu Aug 25, 2011 5:32 pm
Rides:: ,'88 C90G x 2
Location: Huddersfield

Re: End Can

Post by Sw4mpy » Sun Oct 09, 2011 6:58 pm

that's useful t'know, cheers Boo 8-)
Top
richg
Posts: 110
Joined: Sat Oct 24, 2009 8:46 pm
Rides:: 1975 pc50, 1998 bandit 600.
Location: Hull

Re: End Can

Post by richg » Mon Oct 10, 2011 5:02 pm

is that a standard can or an aftermarket one in the picture?
Top
Post Reply

Return to “Wanted”