Footrests & sidestand for C90 electric start

[George]

Hi George, are you still able to get these, I’d like to know as looking at later c90s and they don’t have side stands. Thank you, also how much? Or could I order myself from Honda?

Hello Bobby, I got your PM and it took me a while to get to the bottom of it. So here it goes.

You can get the JDM specific ones and I did order some at some point for someone else so not in my tables of parts to check. But I am sure that this should fit a 12V 90 engine:

Bar Comp, Step, Part Number: 50610-GT0-700

Check with your local Honda Dealer or any other online Honda Parts dealer that you know of. Mine was bought from nutjob.ie.

CMSNL also has it available: https://www.cmsnl.com/honda-c90cm-1999- ... 610gt0700/

You can order it yourself, yes. I hope this helps.

Kind Regards,

George M.

[Bobby90]

Hi George, really appreciate that, thank you for taking the time to check and get back to me

What a great forum and so many people being helpful.

[Devon general andy]

Well done George for finding that footpeg bar.
I know that you can buy the rubbers, side stand and pivot separately.

There you go Bobby90, we
(or should I say George)
got there in the end.

[ally]

I've been trawling, this new number seems out of stock on cmsnl and in japan along with david silvers and fowleers

lings show it available but might be worth checking first

https://hondaspareparts.co.uk/products/ ... 361c&_ss=r

[Bobby90]

And just a few miles down the road Thank you all, amazing

[Bobby90]

They didn’t have one, I have managed to get a similar one, one side has the wider mount, the other bolts are on a thin straight mount, will see if it fits. If it does I will order the actual sidestand and bolt, spring etc.