Page 1 of 1

1976 6v C90 Chainguard

Posted: Sat Nov 11, 2017 4:53 am
by Dr_StrangeTrick
Hi all, I'm looking for a set of chainguards to fit round headlamp 6v C90 please?

Re: 1976 6v C90 Chainguard

Posted: Sat Nov 11, 2017 1:07 pm
by Hightechpete
I was unable to find a zz chainguard, it may be of interest that the commonly available copies (got mine from M+P for around £20) can be modified to fit the zz swingarm. The mounting holes lined up ok, but a small section had to be cut out in order to fit around the lower shock mounting.
I have photos of the mod on photobucket if you're interested.

Re: 1976 6v C90 Chainguard

Posted: Sat Nov 11, 2017 1:16 pm
by Dr_StrangeTrick
Thanks, that would be handy :D

Re: 1976 6v C90 Chainguard

Posted: Sat Nov 11, 2017 7:23 pm
by Hightechpete
I've marked the section that will need cutting out, tin snips should work ok.

Image

Re: 1976 6v C90 Chainguard

Posted: Sat Nov 11, 2017 7:29 pm
by Dr_StrangeTrick
Cheers, thanks Pete

Re: 1976 6v C90 Chainguard

Posted: Sat Nov 11, 2017 7:44 pm
by Hightechpete
You're welcome, just been to the garage to check and found another mounting hole will have to be drilled in the top section just behind the cut out.

Re: 1976 6v C90 Chainguard

Posted: Sat Nov 11, 2017 7:54 pm
by Dr_StrangeTrick
Not a problem for me, that tab has fell off my swingarm so I use three bolts and cable tie the top and bottom halves together (round the flanged bit)