C90 rubber
-
- Posts: 43
- Joined: Mon Mar 30, 2015 8:40 am
- Rides:: honda cub c90,Ducati panigale 1299s,honda monkey125, aprilia Mille,jincheng M50d
- Location: raunds northants
C90 rubber
Hi I'm looking for a 12v c90 carb intake manifold and also the black rubber seal for the wiring that sits in the top of the left casing/mag cover that stops water ingress into the mag. Thanks Stefan
- Diesel Dave
- Posts: 11055
- Joined: Tue Oct 13, 2009 7:25 pm
- Rides:: 1965 Enfield Diesel, 2017 Sterling, Modenas Kriss and CT200 - the only Cub left
- Location: Brentwood, Essex
Re: C90 rubber
There are 2 types, depends on the age of your motor (specifically the head). Early types have thin flanges on the manifold & carb and a bigger port size, later have thick flanges and captive nuts on the carb and a smaller port size in the head.Wellingborough65 wrote:Hi I'm looking for a 12v c90 carb intake manifold
-
- Posts: 43
- Joined: Mon Mar 30, 2015 8:40 am
- Rides:: honda cub c90,Ducati panigale 1299s,honda monkey125, aprilia Mille,jincheng M50d
- Location: raunds northants
Re: C90 rubber
Thanks for your reply Dave the manifold is for a L50c I've fitted with a new lifan 110 manual box and the manifold supplied with it will not fit so I think after looking at my 86' 12 v this is the manifold that I need?
-
- Posts: 43
- Joined: Mon Mar 30, 2015 8:40 am
- Rides:: honda cub c90,Ducati panigale 1299s,honda monkey125, aprilia Mille,jincheng M50d
- Location: raunds northants
Re: C90 rubber
Sorry Dave it's a c50 L not a L50c.
- Diesel Dave
- Posts: 11055
- Joined: Tue Oct 13, 2009 7:25 pm
- Rides:: 1965 Enfield Diesel, 2017 Sterling, Modenas Kriss and CT200 - the only Cub left
- Location: Brentwood, Essex
Re: C90 rubber
The Lifan 110 has the same port size as the early 12v C90 so ideally you need the thin flange manifold.
Either carb will do - just don't try the 50 version
Either carb will do - just don't try the 50 version
-
- Posts: 43
- Joined: Mon Mar 30, 2015 8:40 am
- Rides:: honda cub c90,Ducati panigale 1299s,honda monkey125, aprilia Mille,jincheng M50d
- Location: raunds northants
Re: C90 manifold
Thanks for your reply Dave sorry about the delay in replying back (I've been away) but does anyone know if I could get a new thinner flange inlet manifold or will I have to wait to find a used one?